Read this article in 中文 Français Deutsch Italiano Português Español
Tsurumi launches its biggest submersible pump
18 November 2026
Tsurumi has expanded upwards its GSZ range of submersible pumps with the launch of the GSZ10150 model for large-scale dewatering projects.
With a motor power of 150kW – twice that of its previous largest model the GSZ2-75-4L - the pump will deliver up to 18,000 litres/min and has a maximum pumping head of 54.5m. (The GSZ2-75-4L provides 17,500 l/min at the lower head of 38m.)
Tsurumi said the new pump was designed to manage substantial volumes of water in challenging environments in civil engineering, infrastructure projects, mines and quarries.
Tsurumi’s new GSZ10150 submersible pump. (Image: Tsurumi)
It will operate with water containing sand and silt, with particle sizes of up to 25mm and dry matter content of 15%.
The pump design incorporates a jacket cooling system which channels the pumped water between the motor housing and the outer jacket, helping to dissipate heat from the motor.
Chrome cast iron impeller
It has a sealed impeller made of chrome cast iron, while a double silicon carbide mechanical seal, immersed in an oil bath, protects the drive unit.
In addition to star-delta starting, operation with a frequency converter is possible, and a cable sensor for autonomous level control can be connected.
The pump has a dry weight of 2.65kg, a height of just under 2.46m and a discharge head of 250mm.
For applications where extreme differences in head are a key consideration, Tsurumi also offers the LH-W high-pressure series which can handle a head of up to 216m.
CONNECT WITH THE TEAM