Vermeer holds Netherlands event to launch compact products

Premium Content

24 July 2009

Vermeer's new BC160XL chipper.

Vermeer's new BC160XL chipper.

Vermeer held a customer and dealer event at its European headquarters in the Netherlands in late June to introduce several new products, including two of relevance to the rental sector: the BC160 XL brush chipper and the very compact D9x13 directional drill.

Around 200 Vermeer customers, distributors and factory staff attended the event in Goes, the Netherlands, receiving demonstrations of the new machines.

The BC 160XL is the latest ‘European' style chipper from Vermeer. The unit weighs under 750 kg (with a full fuel tank), has compact dimensions - it folds down to a height of 1.93 m for transport and storage and has a working height of 2.4 m - and is mounted on a 360 degree rotating turntable with six locking positions.

The in-feed chute is 1.04 m wide and 0.67 m high and Vermeer says the chipper will take branches up to 16 cm in diameter. Power is provided by19.3 kW diesel Kohler engine, which is rubber isolated, and the engine has a shielded exhaust to reduce sound and heat emissions and an oversized engine sump for increased oil capacity.

Meanwhile, the new D9x13 Series II Navigator horizontal directional drill (HDD) is designed for confined sites and areas where grass protection is important, such as residential and commercial lawns. Vermeer said the unit will be especially useful for underground cable and other utility installations.

The D9x13, which can accommodate 91.4 m of drill rod, is just 0.9 m wide, "making it the narrowest machine in its class", said Vermeer. The rod side track can be extended an additional 16.5 cm to 108 cm outwards, adding width to increase side-hill stability.

Latest News
UK watchdog proposes even higher duty on Chinese excavators
UK trade watchdog the Trade Remedies Authority (TRA) has proposed upping anti-dumping duties on imported Chinese excavators to as much as 80.16%
Volvo CE and Trimble eliminate extra hardware in new excavator tie-up
Volvo Construction Equipment and Trimble have developed a fully integrated excavator machine control system set to be introduced to select machines in Q1 of 2027
Hamm adds six new models to compactor range
Hamm has expanded its compactor range with six models in the 20–25 tonne weight classes
CONNECT WITH THE TEAM
Murray Pollok Editor, International Rental News Tel: +44 (0)1505 850043 E-mail: [email protected]
Ollie Hodges Vice President, Sales Tel: +44 (0)1892 786253 E-mail: [email protected]
CONNECT WITH SOCIAL MEDIA